Wednesday, January 7, 2015

finding components

Finding components is a pain! I found 'almost' all components and I'm currently working on the PCB design:
For example, I've spend over half a day (maybe due to lack of google skills?!) trying to find the PS3 Blu-Ray type power connector. You can help me out by finding the (type) name of the connector (It looks like a floppy "berg" type connector but it isn't..).


Posted by at

8 comments:

  1. UnknownJanuary 9, 2015 at 7:53 AM

    Hi Mr Wicked. These guys might be able to help:

    http://www.ausgamestore.com/ps3/ps3-blu-ray-drive.html

    ReplyDelete
  2. grillJanuary 10, 2015 at 3:32 AM

    This seems quite cheap: http://www.aliexpress.com/item/blu-ray-dvd-drive-power-cable-for-For-PS3-KES-410A-Flex-Ribbon-Cable/939551255.html

    ReplyDelete
  3. jpkalsJanuary 10, 2015 at 9:13 AM

    Looks like JST 04ZR-3H-P. Not sure, though.

    ReplyDelete
  4. AnonymousJanuary 10, 2015 at 2:12 PM

    Maybe it's easier to source 150 cables @ $0.7 a piece?

    http://www.honsoncn.com/ps3/repair-part/ps3-400a-drive-power-flex-cable.Html

    Get some quotations and let's see how much they're asking for 150 pieces:

    http://honsoncn.en.alibaba.com/product/1961809850-221707397/For_P3_400A_drive_power_flex_cable.html

    http://canxing.en.alibaba.com/product/1716495378-209592310/For_PS3_400A_drive_power_flex_cable.html

    http://www.laudtec.com.cn/ps3-400a-drive-power-flex-cable.html

    http://www.xhegames.com/ProductView.asp?/843.html

    I wasn't able to find anything useful and they only mentioned something not that useful:

    http://www.ps3devwiki.com/ps3/Bluray_Drive

    http://www.ps3hax.net/showthread.php?t=57283

    CN502

    Q6010

    SI4943BDY-T1-E3

    ReplyDelete
  5. UnknownJanuary 11, 2015 at 1:32 PM

    That resembles one of the older "Molex" connectors. Although the socket isn't standard, the wire color code sequence appears to be the same.

    ReplyDelete
  6. Mr WickedJanuary 27, 2015 at 10:40 PM

    Thank you for the reply guys, although those cables are a good idea (maybe a bit to short, as it needs to travel in the length of the enclosure). I would still need a male connector. I'll contact those suppliers to see if they know what type it is.

    ReplyDelete
  7. jacobacciNovember 23, 2015 at 6:38 AM

    I have been using your sacd_extract.exe for a while now and I noticed some inconsistent behaviours re. handling of output paths. Where should I post these observations?

    ReplyDelete
  8. UnknownJanuary 15, 2016 at 12:36 PM

    Hi, any news on the progress?
    Tks.
    Valter

    ReplyDelete

Subscribe to: Post Comments (Atom)